Microsoft Windows XP
[Version 5.1.2600
](C) Copyright 1986-2001 Microsoft Corp.
C
:\WINDOWS>netsh firewall add portopening ?
add portopening
[ protocol =
] TCP
|UDP
|ALL
[ port =
] 1-65535
[ name =
] name
[ [ mode =
] ENABLE
|DISABLE
[ scope =
] ALL
|SUBNET
|CUSTOM
[ addresses =
] addresses
[ profile =
] CURRENT
|DOMAIN
|STANDARD
|ALL
[ interface =
] name
]
Adds firewall port configuration.
Parameters
:
protocol - Port protocol.
TCP - Transmission Control Protocol (TCP).
UDP - User Datagram Protocol (UDP).
ALL - All protocols.
port - Port number.
name - Port name.
mode - Port mode (optional).
ENABLE - Allow through firewall (default).
DISABLE - Do not allow through firewall.
scope - Port scope (optional).
ALL - Allow all traffic through firewall (default).
SUBNET - Allow only local network (subnet) traffic through firewall.
CUSTOM - Allow only specified traffic through firewall.
addresses - Custom scope addresses (optional).
profile - Configuration profile (optional).
CURRENT - Current profile (default).
DOMAIN - Domain profile.
STANDARD - Standard profile.
ALL - All profiles.
interface - Interface name (optional).
Remarks
: 'profile' and 'interface' may not be specified together.
'scope' and 'interface' may not be specified together.
'scope' must be 'CUSTOM' to specify 'addresses'.
Examples
:
add portopening TCP 80 MyWebPort
add portopening UDP 500 IKE ENABLE ALL
add portopening ALL 53 DNS ENABLE CUSTOM
157.60.0.1,172.16.0.0/16,10.0.0.0/255.0.0.0,LocalSubnet
add portopening protocol = TCP port = 80 name = MyWebPort
add portopening protocol = UDP port = 500 name = IKE mode = ENABLE scope = ALL
add portopening protocol = ALL port = 53 name = DNS mode = ENABLE
scope = CUSTOM addresses =
157.60.0.1,172.16.0.0/16,10.0.0.0/255.0.0.0,LocalSubnet
