netsh » routing » ip » igmp » set » interface

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1986-2001 Microsoft Corp.
C:\WINDOWS>netsh routing ip igmp set interface ? 用法: set interface [name=] [[igmpprototype=]igmprtrv1|igmprtrv2|igmprtrv3|igmpproxy] [[ifenabled=]enable|disable] [[robustvar=]integer] [[genqueryinterval=]integer] [[genqueryresptime=]integer] [[startupquerycount=]integer] [[startupqueryinterval=]integer] [[lastmemquerycount=]integer] [[lastmemqueryinterval=]integer] [[accnonrtralertpkts=]yes|no] 参数: 标记 值 name - 要配置 IGMP 的指定涌诘拿啤? igmpprototype - 要在此接口上配置的协议的类型。 默认类型为 igmprtrv2。 ifenabled - 指定启用或禁用协议。 默认为启用。 robustvar - 稳定性变量。应该大于零 (0)。 默认值为 2。 genqueryinterval - 发送常规查询到接口的间隔(以秒 为单位)。 默认值为 125 秒。 genqueryresptime - 主机应该响应一般性查询的最大 响应时间(以秒为单位)。默认值 为 10 秒。 startupquerycount - 在启动时要发送的一般性查询数 目。默认值为 2。 startupqueryinterval - 在启动时发送的一般性查询的间 隔。默认值为 31 秒。 lastmemquerycount - 在收到一个主机离开组的通知时, 发送的组特定的查询数目。默认 值为 2。 lastmemqueryinterval - 组特定的查询的间隔。默认值为 1000 毫秒。 accnonrtralertpkts - 是否接受没有路由警告选项设置 的 IGMP 数据包。默认为'yes'。 注释 : 在指定接口上配置 IGMP。对于 IGMP 代理,只有 'ifenabled' 参数被使用。对于 IGMP v1 路由器,'lastmemquerycount' 和 'lastmemqueryinterval' 没有被使用。 示例 : set interface "Local Area Connection" startupqueryinterval=21 示例命令在指定接口上更改默认启动查询间隔为 21 秒。 其他参数在没有指定,它们使用相关的默认值。

NETSH / ROUTING / IP / IGMP / SET / INTERFACE


Quick - Link:
netsh interface ipv6 isatap show state
显示 ISATAP 状态。
netsh routing ip set rtmroute
更改一个非永久 netmgmt 路由。
netsh ras aaaa show
显示信息。
netsh firewall set
设置防火墙配置。
netsh routing ip ospf add neighbor
添加 OSPF 邻居。
netsh interface show
显示信息。








Windows-10


... Windows 10 FAQ
... Windows 10 How To


Windows 10 How To


... Windows 11 How To
... Windows 10 FAQ



更改接口配置参数。 / Windows 2000/XP

HTTP: ... cmd/cn/Windows_XP/netsh/routing/ip/igmp/set/interface.htm
0.046
18387

In which programming language is the freeware written?

What are Windows applications?

Use the virtual pointer on Windows 11 without any problems?

Time display, date display, right, left, side by side on the desktop!

USB drives not recognized under Windows 11 / 10 / 8.1 / 7, why?

Difference between ???



(0)