NETSH - Windows 7 & Vista + Server 2008

netsh » interface » ipv6 » set » interface

Microsoft Windows [Version 6.1.7000]
(C) Copyright 2009 Microsoft Corp.
C:\Windows>netsh interface ipv6 set interface ? Usage: set interface [interface=] [[forwarding=]enabled|disabled] [[advertise=]enabled|disabled] [[mtu=]] [[siteid=]] [[metric=]automatic|] [[firewall=]enabled|disabled] [[siteprefixlength=]] [[nud=]enabled|disabled] [[basereachabletime=]] [[retransmittime=]] [[dadtransmits=]] [[routerdiscovery=]enabled|disabled|dhcp] [[managedaddress=]enabled|disabled] [[otherstateful=]enabled|disabled] [[weakhostsend=]enabled|disabled] [[weakhostreceive=]enabled|disabled] [[ignoredefaultroutes=]enabled|disabled] [[advertisedrouterlifetime=]<0-65535>] [[advertisedefaultroute=]enabled|disabled] [[currenthoplimit=]<0-255>] [[store=]active|persistent] [[forcearpndwolpattern=]enabled|disabled] [[enabledirectedmacwolpattern=]enabled|disabled] Parameters: Tag Value interface - Interface name or index. forwarding - Whether packets arriving on this interface can be forwarded to other interfaces. advertise - Whether router advertisments are to be sent on this interface. The default is disabled. mtu - The MTU of this interface. The default is the natural MTU of the link. siteid - The Site-id can no longer be configured from netsh. metric - Interface metric, added to route metrics for all routes over the interface. firewall - The Firewall can no longer be configured from netsh. siteprefixlength - Default length of global prefix for the site. nud - Whether neighbor unreachability detection is enabled. Default depends on type of interface. basereachable - Base reachable time (in ms). retransmittime - Retransmit time (in ms). dadtransmits - Number of duplicate address detection transmits. routerdiscovery - Can be enabled, disabled, or controlled by DHCP. managedaddress - Whether managed address configuration is enabled.Setting this parameter will have no effect on an interface that has router discovery enabled & advertising disabled. In that case the parameter is controlled by router discovery. otherstateful - Whether other stateful configuration is enabled. Setting this parameter will have no effect on an interface that has router discovery enabled & advertising disabled. In that case the parameter is controlled by router discovery. weakhostsend - Whether weak host sends are enabled. weakhostreceive - Whether weak host receives are enabled. ignoredefaultroutes - Ignores default routes on the interface. Default: Disabled advertisedrouterlifetime- Router lifetime (in seconds).Default is 1800. advertisedefaultroute- Whether interface will be advertised as default router. currenthoplimit - Hop limit in outbound traffic. store - active: Set only lasts until next boot. persistent: Set is persistent. forcearpndwolpattern - Whether address resolution and neighbor discovery packet patterns are configured to wake up the machine. enabledirectedmacwolpattern - Whether directed MAC packet patterns are configured to wake up the machine. Remarks: Modifies interface configuration parameters. Example: set interface "1" metric=2 forwarding=enabled store=active

NETSH / INTERFACE / IPV6 / SET / INTERFACE

netsh interface ipv6 set interface - Windows Seven - command Modifies interface configuration parameters for IP. / Windows Seven
netsh, interface, ipv6, set, interface, cmd, command, Windows, Seven
Quick - Link:
netsh ras ipv6 set access
Sets whether clients are given access beyond the remote
netsh interface ipv6 add dnsservers
Adds a static DNS server address.
netsh ras diagnostics show configuration
Configuration Info.
netsh interface ipv4 show icmpstats
Displays ICMP statistics.
netsh ras aaaa set authentication
Sets the authentication provider.
netsh interface ipv4 add winsservers
Adds a static WINS server address.












Windows-10





Windows-10
HTTP: ... cmd/en/Windows_7/netsh/interface/ipv6/set/interface.htm

0.046

Rückgängig machen das Umbenennen in WordPad bei Windows 10?

 /

Problems with Windows-10 and favorites and desktop shortcuts!

 /

RUN the Windows Control Panel, how to?

 /

Fastest way to switch user in Windows 10 without log-off?

 /

The Random number generator create multiple files for Windows!

 /

Preview PDF files of Adobe and other Images from Explorer views?

 /

Customize SmartScreen on Windows 10 (disable, enable)?

 /

Percentage usage of every file and folder on Windows (10, 8.1, 7)!

 /