NETSH - Windows 7 & Vista + Server 2008

netsh » ipsec » dynamic » delete » rule

Microsoft Windows [Version 6.1.7000]
(C) Copyright 2009 Microsoft Corp.
C:\Windows>netsh ipsec dynamic delete rule ? Usage: rule [ srcaddr = ] (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 | dns | server) [ dstaddr = ] (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 | dns | server) [ protocol = ] (ANY | ICMP | TCP | UDP | RAW | ) [ srcport = ] [ dstport = ] [ mirrored = ] (yes | no) [ conntype = ] (lan | dialup | all) [ [ srcmask = ] (mask | prefix) ] [ [ dstmask = ] (mask | prefix) ] [ [ tunneldstaddress = ] (ip | dns) ] Deletes a rule from SPD. Parameters: Tag Value srcaddr -Source ip address (ipv4 or ipv6), address range, dns name, or server type. dstaddr -Destination ip address (ipv4 or ipv6), address range, dns name, or server type. protocol -Can be ANY, ICMP, TCP, UDP, RAW, or an integer. srcport -Source port. A value of 0 means any port. dstport -Destination port. A value of 0 means any port. mirrored -'Yes' creates two filters, one in each direction. conntype -Connection type can be lan, dialup or 'all'. srcmask -Source address mask or a prefix of 1 through 32. dstmask -Destination address mask or a prefix of 1 through 32. tunneldstaddress -Tunnel destination ip address or dns name. Remarks: 1. To specify the current computer address, set srcaddr/dstaddr=me To specify all computer addresses, set srcaddr/dstaddr=any 2. Server type can be WINS, DNS, DHCP or GATEWAY 3. If an address range is specified, the endpoints need to be specific addresses (not lists, or subnets) and of the same type (both should be v4 or both should be v6). Examples: delete rule srca=192.168.145.110 dsta=192.168.145.215 tunneldsta=192.168.145.1 proto=tcp srcport=80 dstport=80 mirror=no conntype=lan

NETSH / IPSEC / DYNAMIC / DELETE / RULE

netsh ipsec dynamic delete rule - Windows Seven - command Deletes a rule and associated filters from SPD. / Windows Seven
netsh, ipsec, dynamic, delete, rule, cmd, command, Windows, Seven
Quick - Link:
netsh interface ipv6 show teredo
Shows Teredo state.
netsh ras show portstatus
Shows the current status of RAS ports.
netsh interface ipv6 set
Sets configuration information.
netsh ras ip show preferredadapter
Shows the preferred adapter for Routing and Remote
netsh interface ipv6 6to4 show relay
Shows the 6to4 relay information.
netsh ras diagnostics set securityeventlog
Enables or disables Security Event logging. You can view Security Event logs using Event Viewer.












Windows-10





Windows-10
HTTP: ... cmd/en/Windows_7/netsh/ipsec/dynamic/delete/rule.htm

0.061

Wie kann man mehrere nicht aufeinander folgende Zeilen von Text in MS-Word markieren?

 /

Formatting via the Command Prompt Windows (10,8,1, 7)!

 /

How big should be the Windows 7 disk partition?

 /

I am visually impaired! How do I enlarge the font on my System for my computer screen eg. desktop?

 /

In Windows 8.1 und 10 zwischen Lokal und Microsoft Account wechseln (Benutzerkonto)!

 /

Top Secret and hidden Commands for Windows 10 Explorer!

 /

Possibility to make OWN theme in Q-Dir for Windows?

 /

Safely remove USB drives via a Windows 8/8.1 or 10 desktop shortcut!

 /