NETSH - Windows 7 & Vista + Server 2008

netsh » ipsec » static » add » filter

Microsoft Windows [Version 6.1.7000]
(C) Copyright 2009 Microsoft Corp.
C:\Windows>netsh ipsec static add filter ? Usage: filter [ filterlist = ] [ srcaddr = ] (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 | dns | server) [ dstaddr = ] (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 | dns | server) [ [ description = ] ] [ [ protocol = ] (ANY | ICMP | TCP | UDP | RAW | ) ] [ [ mirrored = ] (yes | no) ] [ [ srcmask = ] (mask | prefix) ] [ [ dstmask = ] (mask | prefix) ] [ [ srcport = ] ] [ [ dstport = ] ] Adds a filter to the specified filter list. Parameters: Tag Value filterlist -Name of the filter list to which the filter is added. srcaddr -Source ip address (ipv4 or ipv6), address range, dns name, or server type. dstaddr -Destination ip address (ipv4 or ipv6), address range, dns name, or server type. description -Brief information about the filter. protocol -Can be ANY, ICMP, TCP, UDP, RAW, or an integer. mirrored -'Yes' creates two filters, one in each direction. srcmask -Source address mask or a prefix of 1 through 32. Not applicable if srcaddr is set to a range dstmask -Destination address mask or a prefix of 1 through 32. Not applicable if dstaddr is set to a range srcport -Source port of the packet. A value of 0 means any port. dstport -Destination port of the packet. A value of 0 means any port. Remarks: 1. If the filter list does not exist it will be created. 2. To specify the current computer address, set srcaddr/dstaddr=me To specify all computer addresses, set srcaddr/dstaddr=any 3. Server type can be WINS, DNS, DHCP or GATEWAY. 4. If source is a server type, then dest is 'me' and vice-versa. 5. If an address range is specified, the endpoints need to be specific addresses (not lists, or subnets) and of the same type (both should be v4 or both should be v6). Examples: 1. add filter filterlist=Filter1 192.145.168.0 192.145.168.45 srcmask=24 dstmask=32 2. add filter filterlist=Filter1 srcaddr=DHCP dstaddr=0.0.0.0 protocol=ICMP srcmask=255.255.255.255 dstmask=255.255.255.255 3. add filter filterlist=Filter1 srcaddr=me dstaddr=any 4. add filter filterlist=Filter1 srcaddr= E3D7::51F4:9BC8:00A8:6420 dstaddr= ME 5. add filter filterlist=Filter1 srcaddr= 192.168.2.1-192,168.2.10 dstaddr= ME

NETSH / IPSEC / STATIC / ADD / FILTER

netsh ipsec static add filter - Windows Seven - command Adds a filter to filter list. / Windows Seven
netsh, ipsec, static, add, filter, cmd, command, Windows, Seven
Quick - Link:
netsh p2p pnrp cloud repair
Starts split detection and repair.
netsh http delete cache
Deletes entries from the HTTP service kernel URI cache.
netsh p2p collab dump
Displays a configuration script.
netsh dhcpclient trace
Enable or disable tracing for DHCP client and DHCP QEC, Dump the last 100 traces.
netsh nap client show grouppolicy
Shows group policy configuration.
netsh branchcache set cachesize
Sets the size of the local cache.




... Home  
... Impressum
... ColorConsole

... CMD
... Netsh-XP
... Netsh-7
... Netsh-Vista
... Powershell










Download the Windows 10 Starter, Home (Basic Premium), Professional und Ultimate!

... facebook.de
HTTP: ... cmd/en/Windows_7/netsh/ipsec/static/add/filter.htm
0.046

Wie kann ich die Outlook Express Kontakte nach Windows 7 Live Mail exportieren?

 /

Wie kann ich nur die Verzeichnis-/Ordnerstruktur drucken?

 /

GetWindowText liest nicht die Spalten zur jeder Zeile in der Listenansicht  aus, warum?

 /

How can I uninstall the ExperienceIndexOK?

 /