NETSH - Windows 7 & Vista + Server 2008

netsh » ipsec » static » delete » filter

Microsoft Windows [Version 6.1.7000]
(C) Copyright 2009 Microsoft Corp.
C:\Windows>netsh ipsec static delete filter ? Usage: filter [ filterlist = ] [ srcaddr = ] (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 | dns | server) [ dstaddr = ] (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 | dns | server) [ [ protocol = ] (ANY | ICMP | TCP | UDP | RAW | ) ] [ [ srcmask = ] (mask | prefix) ] [ [ dstmask = ] (mask | prefix) ] [ [ srcport = ] ] [ [ dstport = ] ] [ [ mirrored = ] (yes | no) ] Deletes a filter from a filter list Parameters: Tag Value filterlist -Name of the filter list to which the filter was added. srcaddr - Source ip address (ipv4 or ipv6), address range, dns name, or server type. dstaddr -Destination ip address (ipv4 or ipv6), address range, dns name, or server type. protocol -Can be ANY, ICMP, TCP, UDP, RAW, or an integer. srcmask -Source address mask or a prefix of 1 through 32. Not applicable if srcaddr is set to a range dstmask -Destination address mask or a prefix of 1 through 32. Not applicable if dstaddr is set to a range srcport -Source port of the packet. A value of 0 means any port dstport -Destination port of the packet. A value of 0 means any port. mirrored -'Yes' creates two filters, one in each direction. Remarks: 1. Deletes the exact match filter from the filter list. 2. To specify the current computer address, set srcaddr/dstaddr=me To specify all computer addresses, set srcaddr/dstaddr=any 3. Server type can be WINS, DNS, DHCP or GATEWAY. 4. If source is a server, then dest is set to 'me' and vice-versa. 5. If an address range is specified, the endpoints need to be specific addresses (not lists, or subnets) and of the same type (both should be v4 or both should be v6). Examples: 1. delete filter FilterList1 src=fum.com dst=fum.com 2. delete filter Filter1 srcaddr=me dstaddr=any proto=TCP 3. delete filter Filter1 srcaddr=GATEWAY dstaddr=0.0.0.0 proto=TCP 4. delete filter Filter1 srcaddr=192.168.2.1-192.168.2.10 dstaddr=ME

NETSH / IPSEC / STATIC / DELETE / FILTER

netsh ipsec static delete filter - Windows Seven - command Deletes a filter from a filter list. / Windows Seven
netsh, ipsec, static, delete, filter, cmd, command, Windows, Seven
Quick - Link:
netsh ras diagnostics show tracefacilities
Shows whether extended tracing is enabled for all components.
netsh interface ipv4 show offload
Displays the offload information.
netsh ras aaaa show authserver
Displays the RADIUS server(s) used for authentication.
netsh interface ipv4 delete route
Deletes a route.
netsh p2p pnrp peer delete registration
Unregisters peer names.
netsh interface 6to4 show interface
Shows the 6to4 interface configuration information.




... Home  
... Impressum
... ColorConsole

... CMD
... Netsh-XP
... Netsh-7
... Netsh-Vista
... Powershell










Download the Windows 10 Starter, Home (Basic Premium), Professional und Ultimate!

... facebook.de
HTTP: ... cmd/en/Windows_7/netsh/ipsec/static/delete/filter.htm
0.015

Wie wählen ich nicht benachbarte Dateien in der Explorer-Listenansicht aus?

 /

Disable Windows 8 / 10 auto turn off?

 /

How to start QuickTextPaste minimized to tray?

 /

Wie kann ich das nervige Klicken im Windows Internet Explorer abschalten?

 /