NETSH - Windows XP/2000

netsh » routing » ip » igmp » set » interface

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1986-2001 Microsoft Corp.
C:\WINDOWS>netsh routing ip igmp set interface ? Usage: set interface [name=] [[igmpprototype=]igmprtrv1|igmprtrv2|igmprtrv3|igmpproxy] [[ifenabled=]enable|disable] [[robustvar=]integer] [[genqueryinterval=]integer] [[genqueryresptime=]integer] [[startupquerycount=]integer] [[startupqueryinterval=]integer] [[lastmemquerycount=]integer] [[lastmemqueryinterval=]integer] [[accnonrtralertpkts=]yes|no] Parameters: Tag Value name - The name of the specific interface where IGMP is being configured. igmpprototype - The type of protocol to be configured on the interface. The default type is igmprtrv2. ifenabled - Whether protocol should be enabled or disabled. The default is enabled. robustvar - Robustness variable. Should be greater than zero (0). The default value is 2. genqueryinterval - An interval in seconds at which general queries should be sent on the interface. The default value is 125 seconds. genqueryresptime - The maximum response time in seconds by which hosts should respond to a general query. The default value is 10 seconds. startupquerycount - The number of general queries that are to be sent during startup. The default value is 2. startupqueryinterval - The interval between general queries sent during startup. The default value is 31 seconds. lastmemquerycount - The number of group-specific queries sent when notice of a host leaving the group is received. The default value is 2. lastmemqueryinterval - The interval between group-specific queries. The default value is 1000 milliseconds. accnonrtralertpkts - Whether to accept IGMP packets that might not have the router alert option set. The default is 'yes'. Remarks: Configures IGMP on the specified interface. For IGMP Proxy, only the 'ifenabled' parameter is used. For IGMP v1 routers, 'lastmemquerycount' and 'lastmemqueryinterval' are not used. Example: set interface "Local Area Connection" startupqueryinterval=21 The example command modifies the default startup query interval to 21 seconds for use with IGMP configuration of the specified interface. Where other parameters are not used, related default values are assumed.

NETSH / ROUTING / IP / IGMP / SET / INTERFACE

netsh routing ip igmp set interface - Windows 2000/XP - command Changes interface configuration parameters. / Windows 2000/XP
netsh, routing, ip, igmp, set, interface, cmd, command, Windows, 2000/XP
Quick - Link:
netsh interface ipv6 isatap show state
Shows the ISATAP state.
netsh routing ip set rtmroute
Modifies a non-persistent netmgmt route.
netsh ras aaaa show
Displays information.
netsh firewall set
Sets firewall configuration.
netsh routing ip ospf add neighbor
Adds OSPF neighbor.
netsh interface show
Displays information.








... Windows-10




Windows 10 How To

... Windows 10 FAQ
... Windows 10 How To




Changes interface configuration parameters. / Windows 2000/XP

HTTP: ... cmd/en/Windows_XP/netsh/routing/ip/igmp/set/interface.htm
0.155
17414

Can I run the ColorConsole as an admin?

 /

Windows 11 und Klick Sound beim Navigieren im Datei-Explorer!

 /

Can I customize in Windows-7 the display of dates, times, currency and measurements?

 /

Korrekte Ordner für 32Bit Anwendungen unter Windows erstellen?

 /

Is it possible to display slow program menus more quickly, how?

 /

Externes Laufwerk vom Defender Virus Scan ausschließen!

 /

Can I use small icons in the Windows 7 Task-Bar?

 /

Unterschied zwischen Speichern und Ausführen beim Herunterladen?

 /

Screensaver to display, pictures directory in windows 8.1 / 10?

 /

Turn off or enable, the Hibernate via the command line Windows 11, 10, ...!

 /

Kann ich in Windows-XP einen Kommentar zu den Dateien hinzufügen?

 /

How to connect a Bluetooth enabled device to Windows 10 computer?

 /