netsh » ipsec » dynamic » delete » rule

Microsoft Windows [Version 6.0.6001]
(C) Copyright 2006 Microsoft Corp.
c:\windows>netsh ipsec dynamic delete rule ? Usage: rule [ srcaddr = ] (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 | dns | server) [ dstaddr = ] (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 | dns | server) [ protocol = ] (ANY | ICMP | TCP | UDP | RAW | ) [ srcport = ] [ dstport = ] [ mirrored = ] (yes | no) [ conntype = ] (lan | dialup | all) [ [ srcmask = ] (mask | prefix) ] [ [ dstmask = ] (mask | prefix) ] [ [ tunneldstaddress = ] (ip | dns) ] Deletes a rule from SPD. Parameters: Tag Value srcaddr -Source ip address (ipv4 or ipv6), address range, dns name, or server type. dstaddr -Destination ip address (ipv4 or ipv6), address range, dns name, or server type. protocol -Can be ANY, ICMP, TCP, UDP, RAW, or an integer. srcport -Source port. A value of 0 means any port. dstport -Destination port. A value of 0 means any port. mirrored -'Yes' creates two filters, one in each direction. conntype -Connection type can be lan, dialup or 'all'. srcmask -Source address mask or a prefix of 1 through 32. dstmask -Destination address mask or a prefix of 1 through 32. tunneldstaddress -Tunnel destination ip address or dns name. Remarks: 1. To specify the current computer address, set srcaddr/dstaddr=me To specify all computer addresses, set srcaddr/dstaddr=any 2. Server type can be WINS, DNS, DHCP or GATEWAY 3. If an address range is specified, the endpoints need to be specific addresses (not lists, or subnets) and of the same type (both should be v4 or both should be v6). Examples: delete rule srca=192.168.145.110 dsta=192.168.145.215 tunneldsta=192.168.145.1 proto=tcp srcport=80 dstport=80 mirror=no conntype=lan

NETSH / IPSEC / DYNAMIC / DELETE / RULE


Quick - Link:
netsh ras diagnostics show securityeventlog
Shows whether Security Event Logs are enabled.
netsh interface portproxy reset
Resets portproxy configuration state.
netsh firewall show multicastbroadcastresponse
Shows firewall multicast/broadcast response configuration.
netsh p2p pnrp cloud repair
Starts split detection and repair.
netsh interface ipv6 6to4 show
Displays information.








Windows-10


... Windows 10 FAQ
... Windows 10 How To


Windows 10 How To


... Windows 11 How To
... Windows 10 FAQ



Deletes a rule and associated filters from SPD. / Windows Vista

HTTP: ... cmd/en/Windows_Vista/netsh/ipsec/dynamic/delete/rule.htm
0.092
17259

Windows 10 / 11 special-character tool start (find, open, run), how to?

Reboot and Delete without query, what does The File Unlocker then?

Hilfe ich finde nach Anleitung keine doppelten Bilder von meinem iPhone, warum?

Extend the output memory of the CMD prompt!

Can my MS-Surface with Windows 10 or 11 be damaged by the tiny insects?

Query the Mac address via the command line (CMD)!



(0)