NETSH - Windows Vista / 2008

netsh » ipsec » dynamic » show » mmfilter

Microsoft Windows [Version 6.0.6001]
(C) Copyright 2006 Microsoft Corp.
c:\windows>netsh ipsec dynamic show mmfilter ? Usage: mmfilter [ name = ] | [ all ] [ [ type = ] (generic | specific) ] [ [ srcaddr = ] (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 | dns | server) ] [ [ dstaddr = ] (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 | dns | server) ] [ [ srcmask = ] (mask | prefix) ] [ [ dstmask = ] (mask | prefix) ] [ [ resolvedns = ] (yes | no) ] Displays main mode filter details from SPD. Parameters: Tag Value name | all -Name of the main mode filter or 'all'. type -Type of filter to display, either specific or generic. srcaddr - Source ip address (ipv4 or ipv6), address range, dns name, or server type. dstaddr -Destination ip address (ipv4 or ipv6), address range, dns name, or server type. srcmask -Source address mask or a prefix of 1 through 32. dstmask -Destination address mask or a prefix of 1 through 32. resolvedns -Value of 'yes' displays the resolved dns name. Remarks: 1. Default for the type parameter is 'generic'. 2. Server type can be WINS, DNS, DHCP or GATEWAY. 3. If 'all' is specified, all main mode filters are displayed. 4. If source address or destination address is specified, only filters associated with that address are displayed. 5. If an address range is specified, the endpoints need to be specific addresses (not lists, or subnets) and of the same type (both should be v4 or both should be v6). Examples: 1. show mmfilter name=mmf 2. show mmfilter all srcaddr=wins dstaddr=192.168.145.112

NETSH / IPSEC / DYNAMIC / SHOW / MMFILTER

netsh ipsec dynamic show mmfilter - Windows Vista - command Displays main mode filter details from SPD. / Windows Vista
netsh, ipsec, dynamic, show, mmfilter, cmd, command, Windows, Vista
Quick - Link:
netsh advfirewall firewall set
Sets new values for properties of a existing rule.
netsh nap client set server
Sets trusted server configuration.
netsh interface 6to4 show state
Shows the 6to4 state.
netsh ras aaaa add authserver
Adds a RADIUS authentication server.
netsh interface ipv6 set privacy
Modifies privacy configuration parameters.
netsh rpc filter show filter
Lists all RPC firewall filters.








... Windows-10




Windows 10 How To

... Windows 10 FAQ
... Windows 10 How To




Displays main mode filter details from SPD. / Windows Vista

HTTP: ... cmd/en/Windows_Vista/netsh/ipsec/dynamic/show/mmfilter.htm
0.296
17419

How can i enable the admin account in Windows 8.1 or 10?

 /

Close correctly, the command prompt e.g. cmd.exe!

 /

System Requirements Immersive Headset for Windows 10 Mixed Reality, what's it?

 /

Kann ich das alternative Energie Effizienz Tool von meinem Windows 10, ... entfernen!

 /

Connect PC monitor to Mac Book or LED TV, but how!

 /

Windows

 /

Use Pixel Tester Portable and Windows 10 problems!?

 /

Wozu brauche ich den send_tab / send_enter Befehl (Windows)?

 /

The screen magnifier in Windows 10, where is it?

 /

Can I use the bugs commercially on my office PC?

 /

Permanently delete files from system default setting!

 /

Meine externe USB Festplatte funktioniert am USB HUB nicht, warum?

 /