NETSH - Windows Vista / 2008

netsh » ipsec » dynamic » show » qmsas

Microsoft Windows [Version 6.0.6001]
(C) Copyright 2006 Microsoft Corp.
c:\windows>netsh ipsec dynamic show qmsas ? Usage: qmsas [ [ all ] ] [ [ srcaddr =] (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 | dns | server) ] [ [ dstaddr =] (ipv4 | ipv6 | ipv4-ipv4 | ipv6-ipv6 | dns | server) ] [ [ protocol = ] (ANY | ICMP | TCP | UDP | RAW | ) ] [ [ format = ] (list | table) ] [ [ resolvedns = ] (yes | no) ] Displays the quick mode security associations for a specified address. Parameters: Tag Value all -Displays all quick mode security associations. srcaddr -Source ip address(ipv4 or ipv6), address range, dns name, or server type. dstaddr -Destination ip address(ipv4 or ipv6), address range, dns name, or server type. protocol -Can be ANY, ICMP, TCP, UDP, RAW, or an integer. format -Output in screen or tab-delimited format. resolvedns -Value of 'yes' displays the resolved dns name. Remarks: 1. Server type can be WINS, DNS, DHCP or GATEWAY. 2. If an address range is specified, the endpoints need to be specific addresses (not lists, or subnets) and of the same type (both should be v4 or both should be v6).\n Examples: 1. show qmsas all 2. show qmsas srca=192.168.145.110 dsta=192.168.145.215

NETSH / IPSEC / DYNAMIC / SHOW / QMSAS

netsh ipsec dynamic show qmsas - Windows Vista - command Displays quick mode security associations from SPD. / Windows Vista
netsh, ipsec, dynamic, show, qmsas, cmd, command, Windows, Vista
Quick - Link:
netsh firewall show allowedprogram
Shows firewall allowed program configuration.
netsh p2p pnrp
Changes to the `netsh p2p pnrp' context.
netsh interface ipv6 6to4 set
Sets configuration information.
netsh ras ip set preferredadapter
Specifies the preferred adapter for Routing and Remote
netsh interface show credentials
Shows the credentials used to connect an interface.
netsh wlan show tracing
Shows whether wireless LAN tracing is enabled or disabled.








... Windows-10




Windows 10 How To

... Windows 10 FAQ
... Windows 10 How To




Displays quick mode security associations from SPD. / Windows Vista

HTTP: ... cmd/en/Windows_Vista/netsh/ipsec/dynamic/show/qmsas.htm
0.202
17705

Help, the PDF scan on Windows is no longer possible, why?

 /

Improved mouse wheel and little load on the CPU or resources!

 /

How to remove APPs from Windows 10 Start Menu?

 /

Where is the classic calculator in Windows 10 (find, start, run)?

 /

What is the difference between power off/on and restart of the mobile smart phone?

 /

Turn off the left desktop corner APP switcher in Windows 8.1 / 10 (screen, disable)!

 /

If I don't restart my computer, does the QTP process stop after a few days?

 /

Clear (clean) Microsoft Edge browser cache!

 /

Command Prompt cmd.exe not receive all paste commands!

 /

The stopwatch window menu is annoying when the clock is reduced!

 /

Split, format, shrink new hard drive step by step ...!

 /

Has the Quad-Dir-Explorer fast access to frequently used programs?

 /