NETSH - Windows Vista / 2008

netsh » interface » ipv6 » set » address

Microsoft Windows [Version 6.0.6001]
(C) Copyright 2006 Microsoft Corp.
c:\windows>netsh interface ipv6 set address ? Usage: set address [interface=] [address=] [[type=]unicast|anycast] [[validlifetime=]|infinite] [[preferredlifetime=]|infinite] [[store=]active|persistent] Parameters: Tag Value interface - Interface name or index. address - IPv6 address to modify. type - One of the following values: unicast: Marks the address as a unicast address. This is the default. anycast: Marks the address as an anycast address. validlifetime - Lifetime over which the address is valid. The default value is infinite. preferredlifetime - Lifetime over which the address is preferred. The default value is infinite. store - One of the following values: active: Set only lasts until next boot. persistent: Set is persistent (default). Remarks: Modifies an IPv6 address on a given interface. Time values can be expressed in days, hours, minutes, and seconds; e.g. 1d2h3m4s. Example: set address "Private" fe80::2 anycast

NETSH / INTERFACE / IPV6 / SET / ADDRESS

netsh interface ipv6 set address - Windows Vista - command Sets the IP address or default gateway to an interface. / Windows Vista
netsh, interface, ipv6, set, address, cmd, command, Windows, Vista
Quick - Link:
netsh show alias
Lists all defined aliases.
netsh ipsec dynamic show stats
Displays IPsec and IKE statistics from SPD.
netsh bridge install
Installs the component corresponding to the current context.
netsh p2p collab contact dump
Displays a configuration script.
netsh interface ipv4 set dynamicportrange
Modifies the range of ports used for dynamic port assignment.
netsh ras diagnostics help
Displays a list of commands.







Windows-10





Windows-10


Become a Sponsor
... Your button here?




HTTP: ... cmd/en/Windows_Vista/netsh/interface/ipv6/set/address.htm
0.124

Problem, PDF preview does not work for me with Q-Dir 4.15 x64?

 /

How can I set the Windows turn off timer / shut down (10 / 8.1 / 7)?

 /

Warum schließt sich die Bildschirmlupe bei Mausklick auf den Windows, oder Desktop?

 /

Turn off and Enable Column in Explorer Listview of Q-Dir!

 /

Wie kann ich VHD unter Windows 8.1 / 8 wieder löschen?

 /

Neue Favoriten Befehl fürs Ausführen-Dialog in Run-Command erstellen!

 /

Can I include or Remove directorys in a library on Windows 7?

 /

Find, start and run the Troubleshooting in Windows-10?

 /