NETSH - Windows Vista / 2008

netsh » ipsec » static » add » filteraction

Microsoft Windows [Version 6.0.6001]
(C) Copyright 2006 Microsoft Corp.
c:\windows>netsh ipsec static add filteraction ? Usage: filteraction [ name = ] [ [ description = ] ] [ [ qmpfs = ] (yes | no) ] [ [ inpass = ] (yes | no) ] [ [ soft = ] (yes | no) ] [ [ action = ] (permit | block | negotiate) ] [ [ qmsecmethods = ] (neg#1 neg#2 ... neg#n) ] Creates a filter action. Parameters: Tag Value name -Name of the filter action. description -Brief information about the type of filter action. qmpfs -Option to set quick mode perfect forward secrecy. inpass -Accept unsecured communication, but always respond using IPsec. This takes a value of either 'yes' or 'no'. soft -Allow unsecured communication with non-IPsec-aware computers. This takes a value of either 'yes' or 'no'. action -This takes permit, block or negotiate. qmsecmethods -IPsec offer in one of the following formats: ESP[ConfAlg,AuthAlg]:k/s AH[HashAlg]:k/s AH[HashAlg]+ESP[ConfAlg,AuthAlg]:k/s where ConfAlg can be DES or 3DES or None. where AuthAlg can be MD5 or SHA1 or None. where HashAlg is MD5 or SHA1. where k is Lifetime in kilobytes. where s is Lifetime in seconds. Remarks: 1. Quick mode security methods are ignored if the action is not 'negotiate' 2. The use of DES and MD5 is not recommended. These cryptographic algorithms are provided for backward compatibility only. Examples: add filteraction name=FilterA qmpfs=yes soft=y action=negotiate qmsec="AH[MD5]:204800k/300s ESP[DES,SHA1]:30000k/480s"

NETSH / IPSEC / STATIC / ADD / FILTERACTION

netsh ipsec static add filteraction - Windows Vista - command Creates a filter action. / Windows Vista
netsh, ipsec, static, add, filteraction, cmd, command, Windows, Vista
Quick - Link:
netsh interface ipv4 show dynamicportrange
Shows dynamic port range configuration parameters.
netsh ras diagnostics show loglevel
Shows the global Log level for RRAS
netsh interface portproxy delete v6tov4
Deletes an entry to listen on for IPv6 and proxy connect to via IPv4.
netsh wlan export
Saves WLAN profiles to XML files.
netsh lan
Changes to the `netsh lan' context.
netsh firewall show config
Shows firewall configuration.







Windows-10





Windows-10


Become a Sponsor
... Your button here?




HTTP: ... cmd/en/Windows_Vista/netsh/ipsec/static/add/filteraction.htm
0.202

Hilfe bei Windows 8.1 / 10  sind keine Desktopverknüpfungen möglich, was mach ich falsch?

 /

Single window mode plus preview window for all explorers!

 /

Folder everybody permissions windows 10 (everyone)?

 /

Wie kann ich den Registrierungs-Editor aufrufen?

 /

Formatting via the Command Prompt Windows (10,8,1, 7)!

 /

Windows-10 change keyboard settings, how to (language, settings)?

 /

System administrator Windows 10, how to activate the full admin account?

 /

Remotedesktop und die Tastaturbefehle mit Beispielen?

 /