NETSH - Windows 7 & Vista + Server 2008

netsh » dnsclient » set » dnsservers

Microsoft Windows [Version 6.1.7000]
(C) Copyright 2009 Microsoft Corp.
C:\Windows>netsh dnsclient set dnsservers ? Usage: set dnsservers [name=] [source=]dhcp|static [[address=]|none] [[register=]none|primary|both] [[validate=]yes|no] Parameters: Tag Value name - The name or index of the interface. source - One of the following values: dhcp: Sets DHCP as the source for configuring DNS servers for the specific interface. static: Sets the source for configuring DNS servers to local static configuration. address - One of the following values: : An IP address for a DNS server. none: Clears the list of DNS servers. register - One of the following values: none: Disables Dynamic DNS registration. primary: Register under the primary DNS suffix only. both: Register under both the primary DNS suffix, as well as under the connection-specific suffix. validate - Specifies whether validation of the DNS server setting will be performed. The value is yes by default. Remarks: Sets DNS server configuration to either DHCP or static mode. Only when source is 'static', is the 'addr' option also available for configuring a static list of DNS server IP addresses for the specified interface. If Validate switch is yes, then the newly set DNS server is validated. Examples: set dnsservers name="Local Area Connection" source=dhcp

NETSH / DNSCLIENT / SET / DNSSERVERS

netsh dnsclient set dnsservers - Windows Seven - command Sets DNS server mode and addresses. / Windows Seven
netsh, dnsclient, set, dnsservers, cmd, command, Windows, Seven
Quick - Link:
netsh interface ipv6 set dynamicportrange
Modifies the range of ports used for dynamic port assignment.
netsh ras ipv6 set
Sets configuration information.
netsh interface ipv6 add address
Adds a static IP address or default gateway to the specified interface.
netsh ras diagnostics show cmtracing
Shows whether Connection Manager logging is enabled.
netsh interface ipv4 show global
Shows global configuration parameters.
netsh ras aaaa set acctserver
Sets properties of an accounting server.








... Windows-10




Windows 10 How To

... Windows 10 FAQ
... Windows 10 How To




Sets DNS server mode and addresses. / Windows 10, 8.1, Seven

HTTP: ... cmd/en/Windows_7/netsh/dnsclient/set/dnsservers.htm
0.156
16568

How do I get into the PC BIOS boot menu instead of using F8?

 /

Do SSD hard drives make noises?

 /

Difference between plotter and printer?

 /

Shrink images in batch processing, it can be that easy!

 /

Prüfen, ob ein Datei-Pfad vorhanden ist, per Befehlszeile?

 /

Windows 11: What is DirectX 12 Ultimate?

 /

Hilfe, Windows 11 hat keinen Leistungsindex, warum?

 /

Start Windows 10/11 Task Manager!

 /

How to manage Google Chrome Passwords?

 /

Problems when auto upgrading to Windows 10?

 /

Wieder mal kein Platz auf der externen Festplatte?

 /

Start or Run Google chrome in the Metro Mode in Windows 8.1!

 /